Simply Automated UPP Guía de usuario descargar pdf (Pagina 3)

Model UCS-01

OTHER MENU SELECTIONS

Delete Events

A range of events can be deleted by entering the event range, for example from

5 to 10, then pressing ENTER



, which would delete events 5 through 10. A

single event may be deleted by specifying the range to be the same number (e.g.

from 5 to 5, would delete event 5).

Input the desired events to be deleted then press the ENTER



button to delete

the range of events.

Set Randomness

Vacation Events are designed so that the ON and OFF time can be random, from

plus or minus 1 to 60 minutes, so that the home has a ‘lived in’ look. As an

example, if Vacation random is set to 10 minutes, and the Schedule Mode is set

for [VAC] Vacation, then all events set for Event Mode ‘V’ will turn ON and/or

OFF within plus or minus 10 minutes of the scheduled ON or OFF time. A new

random number is applied to each of the Vacation Events every day and is the

same random number for both ON and OFF time.

Select the number of minutes then press ENTER



button to save.

Set Contrast

To adjust the display contrast (i.e. viewing angle), hold the Up or Down button

until the desired contrast is displayed. Press ENTER



button to save contrast

level.

Controller, Scheduler-Timer

DESCRIPTION

The UPB Controller, Scheduler-Timer (model UCS) provides control of UPB

devices or UPB Links according to a user defined event or schedule. It is

designed to communicate with a UPB network when connected to a standard

power receptacle; using the L-shaped power connector or the 6 foot power cord,

both included.

The UCS can offload scheduled events from a whole home automation system

and provide quick and easy event scheduling for an end user. Up to 99 events

can be configured once the time, date and location are set in the UCS. Location

is set by entering zip code or latitude/longitude.

The 99 available event(s) can control a device or a Link with respect to time,

sunrise (dawn), sunset (dusk) or a combination of a time ± minutes from sunrise

or sunset. Each event has a mode setting (Event Mode) which can be

configured as ON (‘R’), OFF (‘r’) or ON with random time settings (‘V’) for

vacation. The Schedule Modes ON [RUN], OFF [OFF] and vacation [VAC] allow

the user to quickly change the operation of the Scheduler-Timer so the

corresponding Event Modes occur. For example an event set for Event Mode ‘V’

only operates when the Schedule Mode is set for (VAC) vacation.

The easy to navigate menus allow configuration without the use of a PC or

software. The Scheduler-Timer is intended for use by an installer or homeowner

who is familiar with the installed UPB Network and UPB products.

In the CIM Mode the Scheduler-Timer may be used as a Computer Interface

Module, allowing a PC with UPStart configuration software to connect to a UPB

network through the UCS.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic safety precautions should always be

followed, including the following:

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

2. Keep away from water. If product comes into contact with water or other

liquid, unplug immediately.

3. Never use products that have been dropped or damaged.

4. Do not use this product outdoors.

5. Do not use this product for other than its intended use.

6. To avoid risk of fire, burns, personal injury and electric shock, install this

product out of reach of small children.

7. Do not cover the product with cloth, paper or any material when in use.

8. This product uses polarized plugs and sockets (one blade is wider than the

other) as a feature to reduce the risk of electric shock. These plugs and

sockets fit only one way. If they do not fit, contact a qualified technician.

Do not use with an extension cord unless plugs can be fully inserted. Do not

alter or replace plugs.

9. SAVE THESE INSTRUCTIONS.

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios

Simply Automated UPP Guía de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Simply Automated UPP